Tsurumi Pump Cross Reference to Barmesa Pumps | Replacement & Alternatives

Tsurumi Pump Crossovers  

This guide provides performance-based pump cross references across major manufacturers including Flygt, Gorman-Rupp, Tsurumi, and Xylem, using Barmesa pumps as alternatives based on application, flow, and head requirements.
This page provides performance-based cross references for Tsurumi pumps using Barmesa equivalents.Why Replace a Tsurumi Pump?


Tsurumi pumps are widely used in wastewater, dewatering, and industrial applications—but many operators are now looking for alternatives due to:

  • Long lead times on replacement units
  • High OEM pricing for new pumps and parts
  • Wear issues in abrasive or solids-heavy environments
  • Obsolete or hard-to-source models

A pump crossover allows you to replace your existing unit with a performance-matched alternative that meets or exceeds your current system requirements.

Tsurumi pumps are primarily submersible pumps used in wastewater, dewatering, and construction applications

That’s where Barmesa Pumps comes in.

 Common Tsurumi Pump Models We Replace

Tsurumi pumps are primarily submersible pumps used in wastewater, dewatering, and construction applications. We regularly provide crossover solutions for Tsurumi pumps used in municipal, industrial, and mining applications.

Frequently Requested Models:

  • Tsurumi 100B4222
  • Tsurumi 100B43.7
  • Tsurumi 150B415
  • Tsurumi HS / LB Series (dewatering pumps)
  • Tsurumi KTV Series (contractor pumps)

If you have a different model, we can still match it—just send the model number or nameplate.

 Barmesa Pump Equivalents

We match Tsurumi pumps to Barmesa equivalents based on flow, head, solids handling, and application.

Tsurumi Pump Cross Reference to Barmesa Pumps

This table provides commonly used performance-based equivalents for Tsurumi submersible pumps using Barmesa pumps based on flow, head, and application requirements.
Tsurumi Model Series Pump Type Barmesa Equivalent HP Flow (GPM) Head (FT) Solids Application Notes
50PU2.4S PU Series Submersible Wastewater Barmesa BSE Series 0.5 Up to 120 GPM Up to 30 FT 2" solids Light wastewater / sump Match system curve before selection; verify solids handling capability
80PU21.5 PU Series Submersible Wastewater Barmesa BSE Series 2 Up to 300 GPM Up to 50 FT 2-3" solids Lift stations / wastewater Match system curve before selection; verify solids handling capability
100B43.7 B Series Submersible Trash Pump Barmesa BSE Series 5 Up to 600 GPM Up to 70 FT 3" solids Municipal wastewater Match system curve before selection; verify solids handling capability
100B422 B Series Submersible Trash Pump Barmesa BSE Series 7.5 Up to 900 GPM Up to 90 FT 3" solids Wastewater / sludge Match system curve before selection; verify solids handling capability
150B411 B Series Submersible Trash Pump Barmesa BSE Series 10 Up to 1200 GPM Up to 110 FT 3-4" solids Heavy solids wastewater Match system curve before selection; verify solids handling capability
LH Series LH Series High Head Submersible Barmesa High Head Series 3–10 Up to 400 GPM Up to 200 FT Low solids Dewatering / high head Match system curve before selection; verify solids handling capability
KTV Series KTV Series Dewatering Pump Barmesa Dewatering Pumps 1–5 Up to 300 GPM Up to 80 FT Low solids Construction dewatering Match system curve before selection; verify solids handling capability
Note: All pump replacements should be verified based on system curve, application conditions, and installation requirements.

How to Choose the Correct Pump Replacement

When replacing a Tsurumi pump, consider the following:

  • Match flow rate (GPM) to system demand
  • Match total dynamic head (TDH)
  • Verify solids handling requirements
  • Verify voltage and phase (single-phase or three-phase)
  • Confirm application type (wastewater, dewatering, construction)

Pump Design Considerations

When replacing a Tsurumi pump, it is important to evaluate pump design and application requirements:

  • Impeller type (vortex vs channel)
  • Solids handling capability
  • Duty cycle (continuous vs intermittent operation)
  • Head and pressure requirements

High-head pumps (such as LH series) are designed for higher pressure applications, while dewatering pumps are used for moving large volumes of water with lower solids content.

Need Help Matching a Pump?

If you need help selecting a replacement for a Tsurumi pump, contact our team with your model number and application details. We will identify the correct Barmesa equivalent.

Why Choose Barmesa as a Replacement?

  • Faster availability vs OEM brands
  • Competitive pricing
  • Heavy-duty construction for solids and abrasive environments
  • Application-based selection instead of one-size-fits-all
  • Reliable performance in municipal, industrial, and mining systems

 How We Match Your Pump

We don’t guess—we match your pump based on:

  • Flow (GPM)
  • Head (TDH)
  • Motor specifications
  • Solids size and type
  • Application conditions

This ensures your replacement performs equal to or better than your existing pump.

 Get a Direct Pump Crossover

Need a replacement for your Tsurumi pump?

Send us:

  • Model number
  • Nameplate photo
  • Flow (GPM)
  • Head (TDH)
  • Voltage

We’ll provide a fast, accurate Barmesa crossover recommendation.

 Common Brands Covered

This crossover system includes commonly used pumps from Flygt, Xylem, and Gorman-Rupp, with Barmesa equivalents identified based on performance and application requirements.

Need Help Matching a Pump?

If you need help selecting a replacement for a Flygt, Gorman-Rupp, or Xylem pump, contact our team with your model number, application, and operating conditions. We will identify the correct Barmesa equivalent.

North Coast Process Equipment specializes in identifying Barmesa pump equivalents for wastewater and industrial applications. North Coast Process Equipment provides pump cross reference solutions for municipal and industrial applications.

Serving municipal and industrial facilities across Ohio and the Midwest.

North Coast Process Equipment specializes in identifying pump cross references and replacement solutions for municipal and industrial applications.