Flygt to Barmesa Pump Cross Reference Guide
Flygt Pump Crossovers
Flygt Pump Crossovers to Barmesa Pumps
This page serves as a reference guide for commonly used Flygt pump replacements using Barmesa Pumps. These cross references are based on performance characteristics such as flow, head, and solids handling in wastewater applications. Many Flygt pumps are part of Xylem, and Barmesa alternatives are commonly used when properly matched to system requirements.
Looking for a replacement for your Flygt pump?
North Coast Process Equipment provides direct crossover solutions to Barmesa pumps, offering equal or better performance with faster lead times and competitive pricing.
Send your Flygt model number and get a matched replacement fast.
WHY SWITCH FROM FLYGT TO BARMESA
- Lower cost alternatives
- Faster availability vs OEM lead times
- Equal or improved hydraulic performance
- Heavy-duty construction for wastewater & slurry
- Expert crossover support
Common Flygt to Barmesa Crossovers
If you are looking for a replacement for Flygt pumps, this page provides direct crossover equivalents using Barmesa Pumps. These replacements are selected based on flow rate, head pressure, solids handling capability, and real-world wastewater applications. Barmesa pumps are commonly used as alternatives when lead times, cost, or availability are critical factors. The table below shows common Flygt pump models and their closest Barmesa equivalents.
What is a Pump Cross Reference?
A pump cross reference is used to identify equivalent or comparable pumps across different manufacturers based on performance characteristics such as flow rate, head, and solids handling capability. These comparisons are commonly used when replacing existing equipment or sourcing alternatives due to lead time or cost.
The following table provides commonly used Flygt to Barmesa pump crossovers based on performance characteristics such as flow rate, head, and solids handling. These equivalents should be verified for each specific application.
| Flygt Model | Series | Barmesa Equivalent | HP | Flow (GPM) | Head (FT) | Solids | Application | Notes |
|---|---|---|---|---|---|---|---|---|
| NP 3085 | NP | Barmesa BSE Series | 2 | Up to 300 | Up to 50 | 2-3" | Small lift stations | Verify TDH and discharge size |
| NP 3102 | NP | Barmesa BSE Series | 3 | Up to 400 | Up to 60 | 3" | Wastewater lift stations | Match system curve before selection |
| NP 3127 | NP | Barmesa BSE Series | 5 | Up to 600 | Up to 80 | 3" | Municipal wastewater | Confirm voltage and rail system |
| NP 3153 | NP | Barmesa BSE Series | 7.5 | Up to 900 | Up to 100 | 3" | Medium lift stations | Check impeller performance curve |
| NP 3171 | NP | Barmesa BSE Series | 10 | Up to 1200 | Up to 120 | 3-4" | Large lift stations | Verify guide rail compatibility |
| NP 3202 | NP | Barmesa BSE Series | 15 | Up to 1500 | Up to 140 | 4" | Industrial wastewater | Confirm installation footprint |
| NP 3301 | NP | Barmesa BSE Series | 20 | Up to 2000 | Up to 160 | 4" | High flow systems | Match system curve and duty point |
| Xylem Brand | Model / Type | Barmesa Equivalent | HP | Flow (GPM) | Head (FT) | Application | Notes |
| Flygt | NP Series | Barmesa BSE Series | 2–20 | Up to 2000 | Up to 160 | Wastewater lift stations | Match flow and TDH requirements |
| Flygt | N Series | Barmesa BSE Series | 3–25 | Up to 2500 | Up to 180 | Municipal wastewater | Check solids handling and impeller type |
| Godwin | CD Series | Barmesa BSP Series | 5–30 | Up to 3000 | Up to 200 | Dewatering / bypass pumping | Verify suction lift and priming |
| Lowara | DL / DOMO Series | Barmesa BSE Series | 1–10 | Up to 500 | Up to 100 | Clear water / light wastewater | Confirm application type |
| Flygt | Ready Series | Barmesa Dewatering Pumps | 1–5 | Up to 300 | Up to 80 | Construction dewatering | Check duty cycle and portability |
Note: All pump replacements should be confirmed against system curve requirements, installation configuration, and application conditions.
Browse available Barmesa submersible pumps to find the right replacement for your application.
Need Help Matching a Pump?
If you need help selecting a replacement for a Flygt, Gorman-Rupp, or Xylem pump, contact our team with your model number, application, and operating conditions. We will identify the correct Barmesa equivalent.
How to Choose the Correct Pump Replacement
When replacing a Flygt pump, it is critical to match performance and application requirements to ensure reliable operation. Use the following criteria when selecting a Barmesa equivalent:
- Flow Rate (GPM): Ensure the replacement pump meets system demand
- Total Dynamic Head (TDH): Match pressure and elevation requirements
- Solids Handling: Confirm the pump can handle the same solids size and type
- Impeller Design: Consider clog resistance and hydraulic performance
- Voltage & Phase: Verify electrical compatibility
- Application Type: Lift station, wastewater, sludge, or dewatering use
Final pump selection should always be confirmed against the system curve to ensure proper performance.
Why Switch from Flygt to Barmesa?
Barmesa pumps are commonly used as performance-equivalent alternatives to Flygt in municipal and industrial wastewater applications.
- Faster lead times and improved availability
- Competitive pricing compared to OEM brands
- Heavy-duty construction for demanding environments
- Proven performance in wastewater systems
- Suitable alternatives when properly matched to system requirements
Frequently Asked Questions
What pump replaces Flygt NP 3102?
A replacement for a Flygt NP 3102 should be selected by matching flow, head, and application requirements. Barmesa submersible pumps can provide comparable performance when properly sized for the system.
Are Barmesa pumps direct replacements for Flygt pumps?
Barmesa pumps are commonly used as performance-equivalent alternatives, but final selection should always be verified based on system requirements and installation conditions.
What should I check before replacing a Flygt pump?
Always verify flow rate, total dynamic head, solids handling requirements, impeller type, voltage, and installation configuration.
Do Barmesa pumps handle solids like Flygt pumps?
Yes, Barmesa pumps are designed for solids handling in wastewater applications, but performance should be evaluated based on the specific model and operating conditions.
APPLICATIONS WE SUPPORT
- Wastewater treatment plants
- Sewer lift stations
- Construction dewatering
- Mining & slurry handling
- Industrial process systems
WHY NORTH COAST PROCESS EQUIPMENT
- Barmesa pump specialists
- Fast quoting (same-day response)
- Nationwide supply
- Custom-engineered solutions
- Direct crossover expertise
RELATED SEARCHES
- Flygt pump replacement
- Flygt pump alternative
- wastewater pump crossover
- submersible pump replacement
- lift station pump alternatives
Don’t see your model? We can match any Flygt pump.
This page serves as a reference guide for commonly used Flygt pump replacements using Barmesa pumps in wastewater and lift station applications.
Common Brands Covered
This crossover system includes commonly used pumps from Flygt, Xylem, and Gorman-Rupp, with Barmesa equivalents identified based on performance and application requirements.
Common Applications
- Wastewater lift stations
- Municipal treatment plants
- Industrial wastewater systems
- Dewatering applications
North Coast Process Equipment specializes in identifying Barmesa pump equivalents for wastewater and industrial applications.
Serving municipal and industrial facilities across Ohio and the Midwest.